How To Fix Worn Spots On Kitchen Cabinets

Kitchen cabinets are one of the first things you notice when you walk into a kitchen. Not only is it used for storing food, spices and dishes, but it can also set the style and theme of a kitchen.

But just like any other part or element of the house, kitchen cabinets won’t stay beautiful forever. It doesn’t help that the kitchen is one of the busiest rooms in the house. It is also normal for wood to discolor. Stains are inevitable over time. After a while, there will be ugly dents and dings in the kitchen cabinets. There would have been stains too.

Which brings you to the question: How do you fix frayed spots on your kitchen cabinets?

Before you repair worn spots on your kitchen cabinet, it is important to perform a visual inspection first. Examine the closet from the inside and out. Look for signs of dents, flaking, water spots and other types of cosmetic problems.

While you’re at it, clean your closet with a damp cloth. You can also use a wood cleaning solution to remove dirt and grit. This will also help you identify the various imperfections in your kitchen cabinet.

Stained wood feels

The stains on the wooden cabinet are an eyesore. You may be tempted to opt for a kitchen cabinet upgrade. But instead of spending hundreds of dollars, why not get the stained wood?

The good news is that this is a pretty easy job for a wooden kitchen cabinet, even for a novice DIYer. You can purchase a colored wood marker at your local hardware store. It is like a marker that can be applied to the surface of a case to hide simple nicks and scratches. Of course, the wood brand or handle should match the hue and color of the kitchen cabinet. If the scratch is large, you can combine different shades of wood marker to make it less visible.

You can also apply a protective layer if you use wood markers to hide obvious dents and scratches. Apply mineral oil or grease to the surface of the wood. This should form a protective layer against water stains and moisten the surface of the wood. This surface in turn prevents dust and dirt from settling on the wood surface.

Allow the mineral oil or lubricant to dry completely before treating the wood. Take a wooden pen and shake it. Remove the cap and run the tip over the scratch or indentation. Depending on the severity of the damage, it may be necessary to apply several light coats to completely hide the damage. If there is any excess coating, it can be removed by lightly applying spirit to a clean, dry cloth. Be sure to close the pen after use to prevent the tip from drying out.

As you can see, it’s easy to hide scratches and teeth on a wooden cabinet. But if the paint is flaking off, touching it up may not be enough. Instead, it may be necessary to perform a full cabinet restoration, including sanding and sealing.

Removing dried stains from kitchen cabinets

Excessive amounts of dried stains can come from a variety of sources, including. B. water and food. These stains can affect the appearance of your kitchen cabinets. This can also affect the long-term integrity of the control box.

How do you remove excessive stains? Prepare common household items, such as. B. a cleaning cloth. You can use a cloth or sponge instead. Wet the cleaning tool with water and move it away from the greasy part or surface of the housing.

If other stains are stubborn or difficult to remove, you can create your own cleaning solution. Mix equal parts white vinegar and water in a saucepan. Then moisten a cleaning cloth or tissue. Now you can use the cleaning tool to remove excessive and hard-to-remove stains on your kitchen cabinet. However, do not apply too much mortar to the surface of the kitchen cabinet. Too much moisture can affect the effect or finish.

Another eco-friendly alternative to the diluted vinegar solution is baking soda. Mix one part baking soda with two parts water and dab it on the dirty spots. Let the paste sit for a few minutes and then wipe it off with a clean cloth.

If these methods do not work, you can also use a thinning varnish to remove the stains from the wooden cabinet. Apply the solvent with a brush and wipe it immediately on the stain. However, the problem with this method is that you risk lightening the color or shade of the wooden furniture.

Filling the casing bores

Sometimes it’s not the stains, but the small holes that spoil the look of a kitchen cabinet. Don’t worry because you can fix these holes without the help of a professional.

The first step in repairing small holes in kitchen cabinets is to take a picture of the cabinet. Go to the hardware store to find a wax crayon that exactly matches the color of the wood. Once you have found and purchased the right wax crayon, you are ready to begin your little DIY project.

Take a soft cloth and spray it with an all-purpose cleaner. Use this to wipe out the hole. Let it dry. Take a wax crayon and stick the tip into the hole. Sweep up the hole on the sides to fill it before aligning. Do the same on the other side of the hole.

However, if the gaps are large, you may need to replace the entire cabinet section. This is a task that may require the assistance of a professional.

Attaching the end around the handle

There may also be worn spots around the kitchen cabinet handle, making it look old and ugly. You could consider cutting out the old cabinet trim, but not only is that difficult for the DIYer, it’s also very messy. A more practical, economical and simple solution is to match the paint around the handle with the old color of the cabinet.

However, you will need stain markers, which are usually available in paint stores and hardware stores. For large worn areas, rub the stain out slightly with a soft cloth.

As you may have guessed, you should choose a stain that best matches the color of your kitchen cabinets. You can take a picture of the storefront. You can also remove the door and take it to the workshop.

At home you can try out the effect by sanding away a little of the stain used. Apply the stain to the fabric before rubbing the paint onto the exposed wood. You can apply a second coat if you feel it is necessary.

Once you’ve chosen a color, you can determine if you can update only the worn parts or if you need to update most of it. To do this, choose a door that is not too visible. Remove it, take off the handle and wash the surface with hot water and detergent. This will remove grease stains that are common on kitchen surfaces. Wipe away any residue and allow the surface to dry. Lightly sand the worn area, wipe away the sanding dust and apply the stain. When the stain has dried, a clear coat can be applied to the sanded surface. If the patch looks good, repeat the steps for the other doors.

But what if the effect is not there? Don’t give up, because you can update most cases. However, you don’t have to do it on the outside of the cabinet door. Instead, you can do it on a wooden surface behind the handle. Use medium grit sandpaper first and then fine grit sandpaper. Put the furniture back in place after wiping off the sanding dust. After drying, apply water-based polyurethane. Allow to dry again before applying a second coat.

When the second coat is dry, compare the surface to the outside of the box. You will want to determine if the finish on the outside of the kitchen cabinet is also clear. When you are satisfied with the appearance of the back of the cabinet door, repeat the steps, this time on the front of the door.

Supplement

As you have discovered after reading this article, getting rid of wear and tear stains on kitchen cabinets is relatively easy.

As the saying goes: Prevention is better than cure. If you don’t want worn spots on your kitchen cabinets, make cleaning a regular routine. Wipe the surfaces with a damp cloth and diluted vinegar. You can also apply a protective sealant that will prevent the surface of the kitchen cabinet from cracking and flaking off.

Post Views:
6

frequently asked questions

How do I retouch dark windows?

How to get the gloss back on wooden cabinets

How can I restore the finish of my kitchen cabinets?

If you like a darker shade: First clean the cabinets with a mixture of TSP and water. Once dry, lightly sand the cabinets and remove the dust with a hot glue gun. Then apply a polyurethane varnish (in the color of your choice). This combination of stain and varnish can probably be achieved in one application.

Related Tags:

Feedback,kitchen cabinet finish coming off,how to fix faded kitchen cabinets,kitchen cabinet repair and refinishing,kitchen cabinet restoration,how to touch up stained kitchen cabinets,how to reseal kitchen cabinets,Privacy settings,How Search works,how to touch up polyurethane kitchen doors,kitchen cabinet restorer