Stucco-cladding is a specially mixed plaster for outdoor use. It’s a very popular site with more than half of the new single-family homes sold in the western quadrant of the United States. with this look.
of Western Art and Architecture
In fact, stucco (not vinyl) is the number one in America according to the 2015 census.
The base of the plaster consists of sand, cement and lime. It seems a bit simplistic, like Plain Jane, and in many areas it can be applied even in its simplest form. But there are so many possibilities of textures and colors for stucco that it might deserve a second look from the owner.
Costs
The application of gypsum requires craftsmanship in brickwork, because cement can harden quickly. In both cases, a wooden wall covering is used as the first layer or substrate, followed by a water barrier, itself followed by a metal batten, so that the cement layer has something to adhere to.
A layer of cement is then applied by scraping to facilitate the application of the finishing layer(s). These two options are then the decision point for the owner who has to decide which one is better: a single layer or multiple layers – usually 3 layers. The outer layer is the area where texture and design are emphasized.
The stucco covers an average of $8.50 to $15.50 per square meter installed. The higher costs per square meter are mainly due to extra layers and/or complex design techniques, such as B. the dashboard (discussed below). Cost factors are also related to the regional availability of materials and qualified installers.
A typical two- or three-room house with about 2,000 square meters of siding costs between $17,000 and $31,000 for standard stucco siding. Since there are many factors that influence the price, we will help explain it, but let’s start by breaking it down.
Price information – Part 2
When it comes to reducing the costs of stucco work, the materials used for all the work are virtually the same. Additional layers increase the overall cost of the installation, as well as more complex design elements.
To understand what a typical plaster specification can mean, let’s use 2 examples where the main difference is the number of layers. Please note that these are estimates based on national averages. See the next section for more details on costs affecting pricing.
Single layer plaster: 2,000 square meters x $10.50 = $21,000 (including labor and scraping)
Water barrier film: 400
Metal rail: $650 (including fasteners, sealant and weather strips)
Building permit: 250
Total project costs 1 = $22,300
Three-layer stucco siding: 2,000 sq. ft. x $12.75 = $25,500 (including working and patche shield)
Remove previous siding: 1600
Lease/waste disposal: 900
Water barrier film: 400
Metal rail: $650 (including fasteners, sealant and weather strips)
Building permit: $250
Total project costs 2 = $29,300
Pay attention: Although the cost of the project exceeds the upper limit of the price range 2. indicated above, it should be noted that if the existing siding is not removed, the cost of the project will be reduced to the price range indicated above.
Factors affecting total cost
The first factor to take into account is probably the need to remove the previous coating. In most cases this is the case with stucco. This is of course not the case with a newly built house.
The number of layers is an important factor. The reasons for using more than one layer are usually related to increased resistance, which affects both the R-value and profitability.
Some layers of stucco have very poor insulating properties, while three-layer installations generally achieve an R-value of 1.0, which is above average for all cladding materials.
The cost-effectiveness of stucco layers is generally rather low, although it varies from region to region and certainly includes design aspects. Stucco generally retains 70% of the value when the house is sold.
Only shedding, discoloration and texture are other factors that influence costs. This is one aspect of stucco design, and there are too many options to mention them all. On the page The type of stucco you will find some texture options. – You will notice that the surface can vary from fairly smooth to very rough.
Colours
The colors are mixed through the upholstery material and generally add little to the cost (maybe a few hundred dollars). It is sometimes only possible to talk to a trowel about a structured surface, but it is more accurate if the facade contains extra materials such as pebbles, shells or other minerals that provide extra depth and colour.
In most parts of the United States, a boisterous statement would be so bold that it would probably be considered eccentric. But in the west and southwest of the country, if done right, it is a sign of the refinement of stucco.
This brings us to the last but obvious factor influencing plaster prices: labour. Plasters, like materials, are easy to find in the southwestern states. Tenders for work are accepted with a high degree of competition between qualified contractors with extensive experience.
In other areas there may be plasterers, but competition is likely to be very weak, which means that their prices may be higher. But given that Stuck is now number one in the United States and is not out of the norm, the market could be more competitive in many areas than it was 10 or 20 years ago.
Good, bad and so beautiful.
Here we list the pros and cons and the main reason to consider stucco.
Good: Stucco-cladding is a low-maintenance, highly durable material that lasts 40 years or more. Colours tend to fade evenly and are generally non-repairable, unless there is an occasional crack in the colour. Because it looks like stone, it is resistant to animals and flammable materials.
Bath: Although single-layer siding is not terribly expensive, three-layer siding has a high price tag compared to other popular siding options for greater durability, a better return on investment and better insulation. In addition, special skills are required for the installation, especially if it is a more elegant design.
In some regions it can be difficult to find multiple offers to keep costs down. Another disadvantage is the rather rainy climate, the plaster doesn’t last as long as in drier/warm climates.
Oh, so beautiful: If the stucco cladding is well executed, it will look majestic but simple in terms of design with well matched colour options between the roof and the exterior installation. Add to that the longevity factor, and it’s no surprise that stucco siding has become the number one option in America.
Partner
Related Tags:
stucco siding pictures,stucco siding lifespan,fiber cement siding vs stucco cost,stucco siding near me,fiber cement siding good or bad,brick pros and cons,cost to remove stucco and install siding,stucco material calculator,average cost of stucco remediation,'re stucco over existing stucco,stucco block wall cost,replacing stucco with hardie board cost,best siding for cold climates,best engineered wood siding,most durable siding,best fiber cement siding,modified wood siding,house siding options and cost,brick vs board and batten cost,what is urethane siding,hardie board vs vinyl price,cedar impressions cost vs vinyl siding,siding labor cost,best siding for hail,vinyl siding cost calculator,cost to reside a house with hardiplank,cheapest way to side a house,cost to reside a 2,000 sq ft house,diy vinyl siding cost,labor cost to install vinyl siding canada,metal siding vs hardie board cost,vinyl vs steel siding forums,siding 2019,brick vs hardie board,brick vs siding home value,cement siding vs stucco,stucco vs hardie siding,stucco vs siding cost,stucco and vinyl siding combinations,siding over stucco cost,exterior cladding canada,disadvantages of cladding,brick cladding pros and cons,what is exterior cladding,composite cladding siding,exterior cladding systems,cost of stucco vs siding,stucco siding pros and cons,fiber cement siding cost,stucco cost calculator,types of stucco siding,vinyl siding cost
