2021 Vinyl Siding Cost Per Sq.Ft. Installed, Plus Pros & Cons, and ROI –

PVC is widely regarded as an extremely durable plastic-based material. The V in the middle of the acronym stands for vinyl, the best-selling material in the American interior market. The PVC used for the side panels benefits from additives that resist fading and increase flexibility without compromising durability.

Vinyl is versatile enough for home use. Horizontal bevel is the most common option for vinyl siding, but there are many other ways to use it as siding for homes and buildings. On the east coast, wood and fibre cement are vinyl’s main competitors, while stucco dominates in the west of the United States.


Since the R-value is an important factor when considering any siding material, it is important to know that vinyl siding takes this into account and distorts its price data.

In general, the cost of vinyl depends on the thickness of the material, with most household products having a thickness of 0.040 to 0.046 inches, or about 1/16 of an inch. With such a thickness, the R-value is not surprisingly low.

However, Vinyl comes in two main varieties: hollow and insulated or foamed. Reverse foam yields at least 3 times (or more) the R-value, while costs increase by at least 3 times or usually double.

In terms of cost, vinyl siding costs on average between $5.50 and $12.50 per square meter of installed area. The low cost is $5.50 to $8.50 per square foot for siding (non-insulated) and the average cost is $7.50 to $12.50 per square foot for foam and/or luxury vinyl siding.

On average, the total cost of a typical two- or three-room house with about 2,000 square meters of siding is between $11,000 and $17,000 for the installation of siding. The average cost of installing polystyrene stabling tracks in the United States is between $15,000 and $25,000.

Although the average is a bit vague, we break down the costs again (next section) and explain the factors that influence the costs (2 sections below).

Price information – Part 2

As mentioned above, when choosing vinyl cladding for your home, you generally choose the thickness and whether or not it is insulating. These are not the only options, but they add more to the costs than the other options.

The type of cladding is another important factor – whether the panels are vertical or horizontal and whether they are in brick or pebble, and/or split-beam style. Often the nuances in a certain style, as well as the experience of the contractor and the quality of the product, are other important cost factors.

To simplify matters, let’s look at two examples of horizontal panels and what the work can do to help you better understand price information:

Hollow vinyl coating: 2,000 square metres x $5.50 = $13,000 (including base materials, plastic film, J-channel, consumables and warranty) Colour to match existing external features: (i.e. Colour to match existing external features): (i.e., Colour to match existing external features): (i.e., exhaust covers, wall shutters, etc.) = $250 Updated window finish: $2,000 (optional) Special garage renovation: (with all the above material considerations) x 700 square meters = $3,000 extra.
Building permit: $250

Total project cost 1 = $13,500

Extended vinyl siding: 2,000 square metres x $8.50 = $17,000 (including all materials and installation)
Remove previous siding: 1400
Delivery/disposal of waste: 600
Upgrade window finish: $2,000.
(optional) Special garage renovation: (with all material considerations above) x 700 square feet = $4,000 extra.
Building permit: $250

Total project cost 2 = $19,250.

Factors affecting installation costs

In our examples above you will see a house of similar size (and a detached garage) with similar costs and options or options for extra costs. Let’s look at these and other factors that influence costs.

The most important factor is the size and layout of the house where the vinyl cladding is installed. The complexity of the overall installation, based on layout and other variables, including custom finishing requirements, can have a significant impact on costs. The amount of work, based on the overall complexity of the project, is something the contractor will rely on more than labour costs.

In general, most homes have easily accessible areas that are rectangular in shape, which is in line with previous experiences. But each house often has its own unique corners and edges, such as multiple facades on two floors, which are more complex and longer due to the triangular shape of the facade.

As a result, more complex and less affordable work with tailor-made requirements will have an impact on labour costs and the time needed by the contractor to complete the project. – In general, the impact of complex areas and custom finishes is not dramatic, but any area that is more complex and less accessible means that the pace of overall operations must be adapted to unique layouts and/or custom finishing requirements.

The exact type of vinyl covering is the second important cost factor. On average, a foam profile doubles the cost of vinyl covering. However, this is not always the case. The high-end cladding with thicker insulation underlayment exceeds the high-end average of $10.50 per square foot and is likely to be installed at approximately $12.50 per square foot.

The profile or the way the panels or boards are installed is one factor, the thickness of the vinyl covering is another, the texture of the surface is another. It can reach a thickness of 0.052 mm, which is unusual, but it is sold by vinyl cladding suppliers and is certainly the most expensive option.

Labour costs are generally quite standard for the region, but may vary depending on experience, the number of team members on site, and whether the team is part of a large high-end renovation company and/or installs a specific brand that offers additional guarantees, etc.

Installing vinyl covering is generally not difficult and is a task that could be carried out by a competent person, although probably much less efficient or with less care around the details of the window covering due to lack of experience and/or lack of the right tools, such as. B. a hernia. Two-storey houses with gabled roofs can be the biggest challenge for the least experienced installer.

Waste is generally accounted for and minimised by professional contractors, while an inexperienced installer is unlikely to include this in his estimate and could ultimately underestimate the costs.

Replacing or updating certain parts of the house, such as B. soffits and window cladding, is often an important consideration when working with facade cladding. The price of these extensions is usually mentioned separately when the paving work is evaluated.

As a homeowner, you need to find out if these updates are included and ask questions about what they mean to you and your home.

In general: If the old siding in your house shows signs of wear and tear, it is likely that the window coverings also show signs of wear and tear. So if you leave them at their new location, the stuffing will come out like a sore thumb.

In our example, by analogy, it’s about the extra cost of an insulated garage. If your house has no other buildings than the house and/or the attached garage, this does not apply because the cost of the railway siding at the top of the list takes into account the total area of the installation. But bear in mind that with this structure all materials (perhaps less the house envelope) are likely to be included in the total cost of the project.

Removing existing stabling tracks is sometimes an option, but this is usually a cost. The costs of removal and disposal may be high, but it is probably better to hire a professional contractor who can do it quickly and accurately than a contractor. Just cleaning up after such a task is worth it.


In fact, the cost of the paint is zero and the contractors can really offer any color imaginable, but they usually have a choice between 7 and 35 colors. If you exceed this limit, a special order may incur additional costs.

The other elements are necessary parts of the work, but their costs are low. It is difficult to hire a contractor to put a siding on your house without a building permit or without extra nails and building materials. – It’s all less than 50 cents per square meter, but something like a building permit is not based on square meters like your local municipality.

Good, bad and so beautiful.

Hello: Vinyl cladding is an economical way to achieve a sustainable colour for your home. The colours fade evenly and the material is resistant to all weather conditions and insects. The return on investment is good (about 77% of what you invest).

The bad ones: Because of the association with plastic siding you may not like vinyl siding, although it is very difficult to see the difference between vinyl siding and for example fiber cement or wooden sidewalk siding. There is also concern that vinyl may melt or warp when exposed to extreme heat, i.e. too much sunlight. It can and does happen, but it is very rarely the case.

Oh, it’s beautiful: Vinyl polystyrene siding offers a high R-value for residential siding. Only natural stone, the most expensive cladding option, competes with it.


vinyl siding cost calculator,cost to reside a house with hardiplank,cheapest way to side a house,cost to reside a 2,000 sq ft house,diy vinyl siding cost,shingle vinyl siding cost,does colored siding cost more,labor cost to install vinyl soffit,best siding for house,lp smartside siding problems,lp smartside vs vinyl siding cost,smartside vs hardie board,lp smartside weight per square foot,liquid vinyl siding contractors,how to price installing vinyl siding,cost to install insulated vinyl siding,who fixes siding on house,partial siding replacement,how much did you pay for vinyl siding,alside siding price list,alside ascend siding reviews,alside siding colors,certainteed siding,vinyl siding cost for 2,000 sq ft house,how much is a box of j-channel,how much does a box of vinyl siding cover,how much does a box of vinyl siding weigh,is vinyl siding worth it,return on investment windows,how much does it cost to stone a house,does new siding increase home value,fiber cement siding,vinyl siding calculator do it yourself,labor cost to install hardie siding,average time to install vinyl siding,cost to replace wood siding,copper siding for houses,cooper siding,copper metallic siding,zinc siding,copper cladding,copper roofing,vinyl siding cost per square foot calculator,how much does it cost to side a 2,000 sq ft house,vinyl siding material cost,premium vinyl siding cost,labor cost to install vinyl siding,how much siding do i need for a 1200 square foot house

You May Also Like