Release date : 20. December 2020 Shana Yuri
There are many reasons why homeowners choose to insulate their homes. Insulation increases energy efficiency, thermal comfort and the total value of a home.
In most cases, homeowners hire a professional insulation contractor to carry out the installation work. Professionals not only have the right equipment and materials at their disposal, they can also do their work in the most efficient way.
However, hiring professionals can be expensive. That’s why, to save money, many homeowners choose the do-it-yourself route.
There is no doubt that using a professional insulation contractor and adopting a do-it-yourself approach to a home improvement project has its advantages.
This can make it difficult to choose one. If you have difficulty deciding which option is best for your situation, you will find it easier to make a decision if you consider the following 5 elements
1. Insulation type to be installed
Depending on the type of insulation system you want to install on your site, the installation itself can be simple or quite complicated. Insulation materials supplied in rod or blanket form are generally easy to handle, especially as the instructions are included in the packaging.
Below are examples of insulation materials supplied in the form of slats or blankets:
- Insulation of fibreglass panels and rollers
- mineral wool insulation
- Insulation of cellulose sheets and rolls
- Tape and spool with natural fibre insulation
- Brass and spool Plastic fibre insulation
Other types of products such as B. Spray foam and bladder insulation are usually installed by professionals because special installation equipment is required.
A Spray foam proportioner is a device that is used to mix two chemicals together so that they form a foam. This machine is typically used for insulation purposes. It mixes the two chemicals together in a specific ratio to create the perfect amount of foam
If you choose to install a batten or batten insulation, you must wear the following protection equipment to protect yourself during the process:
- Eye protection
- Dust mask
- Gloves
- Clothing that covers the body from head to toe.
It’s also a good idea to work with a partner. This makes the work easier and faster.
2. Insulation room
It is easier to install insulation if the space is open and accessible. This means that you usually don’t have any problems installing the insulation yourself if you work in an attic or in a basement where there is an entrance.
On the other hand, it is better to leave certain areas such as floors, floor coverings, ceilings and walls to professionals. They have the equipment and expertise to properly install insulation in these narrow, hard-to-reach areas, especially when demolition is required.
The use of a professional insulation contractor is also the best solution if you are renovating or rebuilding your house. This ensures that the insulation system is installed without running the risk of slowing down other housing improvement projects.
3. Your experience
Experience in installing insulation can be very useful for any installation project. If you have worked with this type of home renovation before, you probably already know the procedures you need to follow to ensure that your insulation system is installed correctly.
You also know how much and what kind of insulation you need to achieve the desired R-values.
It is of course highly recommended to use a professional contractor if you have no experience in installing insulation. However, if you plan to isolate other parts of your home yourself, it is a good idea to use people with do-it-yourself experience.
4. Your willingness to sacrifice time and comfort
Installing insulation is a tedious and time-consuming task. Moreover, you will feel a lot of discomfort because you install it in poorly ventilated and inconspicuous areas.
For these reasons, many owners prefer to entrust the work to professionals because it is more convenient. However, if you are willing to spend time and endure uncomfortable circumstances, consider tackling the project yourself.
5. Potential safety risks
Even if you have experience installing insulation and are willing to work in an uncomfortable environment, you may have to give up your home improvement project if you are concerned about safety.
No matter what kind of do-it-yourself work you do, safety should always be your top priority. It is therefore best to contact a professional if you notice the following problems in the vicinity of the installation:
- Mold and mildew infestation
- Damp or wet surfaces
- Air leakage
- Wood rot on beams, walls and wooden floors.
- Open wiring
- Possible signs of the presence of asbestos
Before starting work on a project, the insulation contractors must first inspect the area. Because they have the experience and resources to take this step, they can easily identify potential security issues on your property.
From there they can immediately implement a solution or recommend another service provider that is capable of tackling the problem properly (as in the case of asbestos control).
Insulating your home has many advantages, but not everyone has the possibility to hire a professional to install the system. Fortunately, it is possible to install the insulation yourself, giving homeowners with a tight budget the opportunity to make improvements.
However, before you start isolating the room itself, you should first consider the above factors. By considering these elements, you can make a more informed decision about the next steps to take.
Related Tags:
hvac industry trends 2020,hvac industry trends 2021,hvac industry growth,commercial hvac trends,new technology in hvac industry,hvac industry covid,u.s. hvac market size,north america hvac market size,hvac market in india,hvac mordor,what is the hvac market,hvac market pdf,hvac industry forecast (2020),future of hvac industry,hvac industry associations,what industry is hvac considered,hvac innovations 2019,hvac industry in india,hvac hot topics,hvac research topics,air conditioner research and development,hvac energy efficiency technology,hvac industry trends,hvac system pdf,goodman hvac training,goodman heat pump maintenance,hvac operation,goodman asure extended service plan cost,goodman credit application,goodman air exchanger,hvac school,hvac salary,hvac near me,hvac meaning,hvac industry 2020,hvac industry statistics,commercial hvac industry trends 2020,hvac industry outlook,new hvac products 2020
